STEP 3: Configure the sensor's operating parameters
Configure parameters like cycle send data, alarm, a, b,...
STEP 4: Add device to Backend Sigfox
refer to section 6.2 for details
STEP 5: Installation
refer to section 8 for details
HW Ver.
FW Ver.
Release Date
Functions Change
1.1
1.0
DEC-2020
WSSFC-G4F-NH3 is a Sigfox-ready sensor with built-in electrochemical gas sensor to measure Ammonia NH3 gas
concentration to measure Toilet odor level. With Ultra-low power design and smart firmware allow the complete
Wireless and Sensor package run on 2 x AA battery 1.5VDC for 2-5 years with 15 minutes update. It can support all
regions of Sigfox network in over the World, RC1, RC2, RC3, RC4, RC5, RC6, RC7.
Typical Applications: Monitor Ammonia in private or public toilets.
SENSORS SPECIFICATION:
NH3 sensor
electrochemical-type gas sensor
1. Functions Change Log
2. Introduction
3. Specification
