daviteq iConnector STHC, User Manual

Page: 5 / 30

Status Meaning
Fixed ON iConnector has been supplied with external power
Blinking (4 seconds blink 1
time)
Without external power, iConnector is using battery.
Blinking (2 seconds blink 1
time)
Low battery warning (Used for type D battery version)
Status Meaning
Fixed ON Modbus connected
Blinking (1 seconds blink 2
time)
Connection errors (wrong configuration of baudrate, noise, …)
OFF No modbus connection
Status Meaning
Fixed ON Connecting with Globiots
Blinking (1s change state)
Initializing wifi generator, waiting for configuration via phone or modbus tool (For
iConnector wifi)
OFF No connection with Globiots
Address
Size
(bytes)
Memory type Read/Write Description
0-0x1FFF 8096 FLASH R/W
Save active configuration, do not allow log,
realtime.
0x2000-
0x22FF
768 RAM R Save data read from modbus slaves.
II. Principle of operation of
iConnector STHC
2.1 General operation principles of
iConnector
2.1.1 LED meaning
2.1.1.1 LED status
2.1.1.2 LED modbus
2.1.1.3 LED network
2.1.2 Memory Map