Installation Steps
Page 3
Disassembling the Station
Open up the station by separating the top and bottom parts as shown in the fol-
lowing illustrations.
1.
Turn the station upside
down.
2.
Remove the three wing nuts,
lock washers and flat wash-
ers located on the underside
of the station.
3.
Turn the station right-side up
with the mounting studs on
top.
Hold plates
while inverting
Inverting the Aspirated Temp/Hum Station
#8 Wing Nuts
#8 Lock Washers
#8 Flat Washers
Removing the Wing Nuts
