Mount the ISS
Page 7
3.
Press the 2nd key then press and hold the CLEAR key until all transmission
diagnostic counters are reset to zero.
4.
View the Percentage of Packets Received, #5 in the illustration below, to
verify communication with the ISS.
5.
If you are not receiving data from the ISS, check that the battery was
installed correctly and that the transmitter ID switches are set correctly. If
you are still not receiving data please contact Davis Technical Support.
6.
If you are successfully receiving data, press and hold the DONE key and
then press the “-” (down arrow) key to put the console back into Setup
Mode. This will prevent the reception of erroneous rain counts from the
rain collector while you mount the ISS.
Mount the ISS
1.
Mount the ISS in its previous location.
2.
All Stations: Plug the WIND sensor cable into the SIM.
3.
Cabled Stations Only: Plug the Console cable into the SIM.
4.
Close the SIM housing cover.
Note:
If desired, you can more securely fasten the SIM housing cover by using self-threading
screws in the holes provided for that purpose. See the SIM Housing Cover illustration
for details.
5.
At your Vantage Pro console: Press and hold the DONE key on the console
to exit Setup Mode.
6.
Cabled Models Only: Verify the reception of data from the ISS at your Van-
tage Pro console. If you are not receiving weather data at the console dou-
ble-check the console cable connections.
Return the Old SIM to Davis
1.
Return the old SIM in the ISS Retrofit Kit shipping box.
2.
Include the shipping paperwork you received with the Retrofit Kit.
Note:
Wireless Models Only: Please be sure to remove the battery before shipping the old SIM.
Vertical Scale: 1 0
STATION NO. 5
am
Last 24 days
day
Every 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
ISS2 RetroKit D011.fm Page 7 Wednesday, February 19, 2003 6:02 PM