11
3. Preparation for charger installation
3.1 General requirements
•
Obtain permission to install this charger in accordance with local regulations.
•
The AC power supply is accessible at the installation location.
•
Ensure that the power cable is disconnected during installation.
3.2. Environment and tool requirements
Prepare before installation:
•
Search and prepare a suitable installation location
•
Ensure that the installation location has a wall suitable for mounting the charger. The expansion bolts used to secure the
rear plate should have a bearing capacity of at least 20kg.
•
In addition to the above, you may also need to prepare the following tools: Drilling machine, Wire stripper, Crimping pliers
insulation tape, pipe terminals, etc.
3.3 Unpack the Charger
•
Remove the charger from its packing case.
•
Take out the packing materials and installation accessories, then set them aside
•
Check all parts to ensure that all materials have been delivered.
a.
Charger
b.
RFID card
c.
Quick Reference Guide
d.
Mounting bracket
e.
Support rear plate
f.
5M 4x12 Screws
•
Inspect the charger and installation parts for any damage. If there is any damage or if parts are missing, please
contact the local supplier representative or the manufacturer's after-sales service.
