background image

LTE EnviroMonitor

® 

Replacement Kit

Product Number 6882 

Document Number: 07395.376 Rev.B  7/7/20

EnviroMonitor

®

, Vantage Pro

®

, Vantage Pro2

, and WeatherLink

®

 are trademarks of Davis Instruments 

Corp., Hayward, CA. 

© Davis Instruments Corp. 2020. All rights reserved. 
Information in this document subject to change without notice. Davis Instruments Quality Management
System is ISO 9001 certified. 

3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.

510-732-9229 • Fax: 510-732-9188

® 

[email protected]  •  www.davisinstruments.com

Connect and Remount your Gateway

Now you are ready to connect and remount your Gateway and add Nodes as 
desired. For instructions on how to do this, please refer to the EnviroMonitor 
Gateway and Node User Guide. It can be found in the support section of 
www.davisinstruments.com.

Contacting Davis Technical Support

For questions about installing or operating your EnviroMonitor Gateway,
please contact Davis Technical Support. We’ll be glad to help.

Online

www.davisinstruments.com

See the Weather Support section for copies of user 
manuals, product specifications, application notes, 
software updates, and more. 

E-mail

[email protected]

Telephone

(510) 732-7814 
Monday - Friday, 7:00 a.m. - 5:30 p.m. Pacific Time. 

Summary of Contents for EnviroMonitor









Reviews: