2
Vantage Connect: Remove the Old Board
Tools Needed:
Phillips head screwdrivers: #3 (small) and #2 (medium)
1. Open your Vantage Connect shelter.
2. Unplug the main power cable from the main power jack and disconnect the
battery cables to allow for easier access to the board.
3. Unscrew the three screws holding the plastic cover over the board, and
remove the cover. Unscrew the two screws securing the cellular antenna.
4. Using a small Phillips head screwdriver, unscrew the two screws securing the
board.
5. Lift out the board and antennas.
6. Install the new board. See page 4:
Install the LTE Replacement Board
.
Old cell modem
antenna
Cover
Old weather
receiver
antenna
Main power jack
Main power cable
Remove screws
Vantage Connect
R
DID: AA123456789
Old board
Remove screws
Summary of Contents for EnviroMonitor
Page 2: ......
