4
Install the LTE Replacement Board
1. Being careful with the antenna cables, center the new board with the screw
holes above the appropriate bosses in the shelter.
2. Using the three #4 x 3/8” screws, attach the board.
3. Install the new cover. Make sure the new mesh antenna cable exits through the
opening on the right hand side of the cover, and the new cellular antennas
cables exit through one of the openings on the left side of the cover. Attach the
cover using the two #6 x 1/2” screws.
4. Put the new black label with the new DID on the cover.
Tip:
Make a note of the new Device ID (DID).
Use these holes
3 #4 X 3/8” screws
Summary of Contents for EnviroMonitor
Page 2: ......
