3
EnviroMonitor Gateway: Remove the old Board
1. Open your Gateway shelter.
2. Unplug the main power cable from the main power jack and disconnect the
battery cables to allow for easier access to the board.
3. Unscrew the two screws holding the plastic cover over the board, and remove
the cover. Unscrew the two screws securing the cellular antenna.
4. Using a small Phillips head screwdriver, unscrew the three screws securing the
board.
5. Lift out the board and antennas.
6. Install the new board. See page 4:
Install the LTE Replacement Board
Main Power Cable
Main
Power
Jack
Remove screws
Old Mesh
Antenna
Old Cellular
Antenna
Cover
R
Remove screws
Old Board
Summary of Contents for EnviroMonitor
Page 2: ......