Product Numbers: 7769
Davis Instruments Part Number: 7395-
115
Large Surge Protector Shelter
Rev. B Manual (7/8/99)
This product complies with the essential protection requirements of the EC EMC
Directive 89/336/EC.
© Davis Instruments Corp. 1996. All rights reserved.
A
TTACHING
W
IRES
TO
S
URGE
P
ROTECTORS
Before attaching wires to the surge protectors, route the cable into the shelter
by passing the cable up through one of the strain reliefs at the bottom of the
shelter. Consult the Surge Protector manual for instructions on attaching wires
to the surge protectors. If using shielded cable, connect drain wires to each
other or to ground, as shown below.
A
TTACHING
W
IRES
TO
THE
S
URGE
P
ROTECTORS
After attaching all wires, tighten the compression nuts on the strain reliefs to
secure the wires and create a weather-resistant seal. If there is a large air space
around the wires, fill the space by wrapping the wires in electrical tape and/or
sealing with silicone caulking.
