Attaching Cable Strain Reliefs
Page 3
A
TTACHING
C
ABLE
S
TRAIN
R
ELIEFS
Attach both strain reliefs to the shelter as shown below. You will need to install
the strain reliefs before running cables into the shelter. Secure the strain reliefs
by tightening the lock nuts. Do not tighten the compression nuts until you have
attached wires to the surge protectors (see “Attaching Wires to Surge Protec-
tors” on page 8).
I
NSTALLING
S
TRAIN
R
ELIEFS
I
NSTALLING
S
URGE
P
ROTECTORS
AND
G
ROUND
W
IRES
Follow the instructions below to install surge protectors and ground wires in
the shelter.
Installing Surge Protectors
1. Attach the bottom end of each ground strap to the shelter using #6 self-tapping
screws and # 6 washers as shown below.
Do not attach the top end of the ground strap to the shelter yet.
A
TTACHING
G
ROUND
S
TRAPS
