11
3. In order for the Envoy to fit in the shelter, you must move the battery platform.
Remove the two screws and washers holding the battery platform in place.
4. Move it to the
right
side (as you face the shelter). Making sure the tray is flush
with the bottom, reinsert and tighten the screws.
5. Plug the power cable back into the jack. (It fits only one way, with the latch in
back.)
6. The battery comes shipped with the positive cable unconnected to prevent
battery drain. Connect the positive (red) cable to the positive (red) terminal on
the battery.
Summary of Contents for 6614
Page 2: ......
