background image

1

Welcome to 
Solar Power Kit &                              
Heavy Duty Solar Power Kit 

(6614 & 6612) 

The Solar Power Kit and the Heavy Duty Solar Power Kit allow you to power and 
shelter your Vantage Pro2 or Vantage Vue console, or your Weather Envoy or 
Envoy8X for remote or field installations. The kits consist of three key elements: a 
solar panel, a battery, and a regulator circuit; in a protective housing in which the 
console or Envoy can be mounted.
The Solar Power Kit (product number 6614) comes with a 1.4 Ah battery. This 
battery is sufficient, in most cases, to power wireless Vantage Pro2 consoles, 
Vantage Vue consoles, and wireless Weather Envoys.

 (

The wireless outdoor sensor 

suite is powered separately by the sensor suite’s solar panel.) It includes a 5 watt 
solar panel.
The Heavy Duty Solar Power Kit (product number 6612) comes with a 12Ah 
battery.  It is required to power cabled consoles, cabled Weather Envoy, and 
Envoy8X, or wherever extra power is needed. It includes a 5 watt solar panel.
In low light or poor conditions, you may need the Heavy Duty Solar Power Kit to 
power wireless consoles or Envoys.

Note: Your Solar Power Kit comes with a battery designed to charge in temperatures as low as 

-20°C. If your installation is in a location with low temperatures, you should replace the 
battery with a Davis battery:

12 Amp. Hr. battery: product number 7011.025
1.4 Amp. Hr.battery: product number 7011.005

If your installation is in a warmer climate, you may replace the 12 Amp. Hr. battery with a 
6-volt, 12 Ah, gel cell battery (standard motorcycle battery). You may replace the 1.4 
Amp. Hr. battery with a 6-volt, 1.4 Ah, gel cell battery. These batteries will only charge at 
temperatures above 0°C. (With either battery, your Solar Power Kit can function down to -
40°C.) 

Summary of Contents for 6614

























Reviews: