2
Parts
Before First Use
• Read the instructions carefully and keep
them for future reference
• Remove all packaging
• Clean the cooking plates by wiping with a
sponge or damp cloth
• DO NOT IMMERSE THE APPLIANCE
IN WATER AND DO NOT RUN WATER
DIRECTLY ONTO THE COOKING
SURFACES
• Dry with a cloth or paper towel
• For best results, lightly coat the cooking
plates with cooking oil or spray
Note: When the appliance is heated for the
first time, it may emit some smoke or odour.
This is normal for many heating appliances.
This does not affect the safety of your
appliance.
How To Use
1. Select the plates you want to use and
ensure they are installed securely.
2. Close the appliance and plug into the wall
outlet. You will notice that the Power Light
and Ready Light will come on, indicating
that the appliance has begun preheating.
3. The Ready Light will go off to indicate it has
reached its desired temperature. This will
take approximately 3-5 minutes.
4. Open the appliance and place batter, eggs,
a sandwich or other foods on the bottom
cooking plate.
5. Close the appliance. The Ready Light will
turn on again.
6. Cook for about 3-6 minutes. Alternatively,
you can wait for the Ready Light to turn off
again or you can check the food to see if it
is golden brown.
7. When your food has cooked, use the handle
to open the lid. Remove your food with the
help of a plastic or silicone spatula. Never
use metal tongs or a knife as these can
cause damage to the non-stick plates.
8. Once you have finished cooking, disconnect
the plug from the wall outlet and leave the
appliance open to cool.
To Remove the Cooking Plates
1. Always unplug the appliance and allow it to
cool down before removing the plates.
2. Open the lid and locate the plate release
buttons on the front of the appliance.
Slide the button backwards and the plate
will pop up slightly from the base. Grasp
the plate with two hands, slide it out from
underneath the metal brackets and lift up.
Press the release button on the top plate to
remove in the same manner.
Upper plate
release button
Bottom plate
release button
1
2
3
4
5
6
7
1. Handle
2. Power light
3. Ready light
4. Upper housing
5. Non-stick plate
6. Bottom housing
7. Handle clip