2
• Never leave the appliance unattended
during operation.
• Do not place the appliance on or near gas,
or on a heated oven.
• Do not operate the appliance close to
flammable or heat-sensitive items and
materials such as tablecloths, curtains,
towels, etc.
• Do not use outdoors. For indoor
household use only.
• Unplug from the outlet when not in use,
while assembling or disassembling, and
before cleaning.
• Never use any attachments that are not
listed in the instruction manual and supplied
in the appliance’s box.
• No-load or over-loaded operation of this
appliance is prohibited.
• If any parts of this appliance’s structure are
found to be damaged (especially the safety
device and power cord), please stop using
and send to a service center to be repaired
by a qualified technician.
• The appliances are not intended to be
operated by means of an external timer or
separate remote-control system
• This appliance is intended to be used in
household and similar applications such as:
• staff kitchen areas in shops, offices and
other working environments;
• farm houses;
• by clients in hotels, motels and other
residential type environments;
• bed and breakfast type environments
Packaging and Recycling:
The materials used for this appliance’s
packaging can be reused, recycled, and
disposed of through specific waste streams.
• REUSE
: Keep the packaging to safely store
or transport your appliance, preventing
damage.
• RECYCLE
: Look for recycling symbols on the
packaging components to identify if they are
recyclable. Check with your local authority
to find out what materials are accepted for
recycling in your area.
• DISPOSE
: Look for symbols on packaging
components and dispose of the materials
accordingly.
Operating Your Electric 4-in-1 Non-Stick
Dessert Maker:
Before first use, ensure all parts have been
cleaned and are thoroughly dry. Clean the
cooking plates by wiping with a damp
sponge or cloth. Dry with a cloth
or paper towel.
NOTE: DO NOT IMMERSE THIS APPLIANCE
IN WATER. DO NOT RUN WATER DIRECTLY
ONTO THE COOKING SURFACES.
Installing the Plates:
1. Position the appliance on a stable and
heat resistant surface, and ensure
it is unplugged.
2. Pull out the handle clip gently and
open the lid.
3. Install the lower plate and upper plate
respectively. Slide tabs of the plate into the
tab slots precisely.
4. Sightly push down the plate into the main
appliance. You will hear a ‘click’ sound
which indicates the plate is well locked.
Operation Instructions:
1. Connect the appliance to a wall outlet.
During first use, you may notice the
appliance producing an unpleasant smell
and smoke haze. This is normal with many
new electrical appliances, due to the
heating of internal components. Brush a
small amount of cooking oil onto the plate
and heat the appliance with the lid open for
five minutes, then unplug the appliance and
use some kitchen paper to remove oil. The
appliance is now ready to use.
2. Spread a layer of butter or cooking oil onto
the plates with a paper towel or cooking
brush before cooking.
3. Close the lid and slide the handle clip
downwards to lock. The red indication light
will illuminate when preheating. Preheat the
appliance until the red indication light turns
off, and it is ready to cook.
4. Fill the plate with some batter you have
prepared, then close the lid and lock the
handle clip. Gently flip over the appliance
if needed - this makes the batter spread
evenly. Do not slam the lid as it may cause
batter to spill. The indicator light will turn
on again.
