8
Manual
DV‑11T
1.7 THE FUSE OF THE DV-11T
The DV-11T has a 6 Amp thermal fuse. This fuse
turns off the DV-11T automatically in case of an
overload and / or a short circuit.
In case the thermal fuse has turned off the
DV-11T (during an overload and / or a short
circuit), the DV-11T can be reset.
Resetting the DV-11T
• Resolve the problem that caused the thermal
fuse to be activated.
• At the bottom of the DV-11T you will see the
thermal fuse with the label ‘Circuit Breaker -
Press to RESET’.
• Press this button to reset the DV-11T.
• The DV-11T is re-activated.
1.8 FOR YOUR SAFETY
• The correct operation of the DV-11T is only
guaranteed, if you observe this manual.
• Although it is possible to install the DV-11T
yourself, we recommend to have this done by
a certified installer.
• Before installing the DV-11T, the 220 V voltage
MUST be taken off the power point (Check this!)
• This guide should only be used for the DV-11T.
• DAVIN
®
products are covered by a 1-year
warranty.
• To qualify for this warranty, you are required
to return the DV-11T to the point of sale.
• If changes are made to DAVIN
®
products
without the express and written prior
permission of the manufacturer, the warranty
will become void.
• The DAVIN
®
warranty will also become void
with improper installation of the DV-11T.
• Neither the manufacturer, nor the importer,
nor the retailers of the DV-11T are liable for
damages arising from the use of the DV-11T.
SERVICE NUMBER / HELPDESK:
+31 (0)6 – 14 813 447
Manual del
DV‑11T
DV-11T Binnenwerk PMS.indd 6
30-10-2012 1:13:05
