5
This SilensorPro pool pump incorporates motor overload detection designed to
protect the motor from overheating. If the motor gets too hot during operation, its
operating speed will reduce to bring it within an acceptable operating temperature
and then will speed up to the originally set speed.
To reset the motor, switch the power off for 30 seconds, and then return the power
from the mains switch.
Guidelines for Recommended Pump Operating Hours
Australian Standards AS3633: “Private swimming pools - water quality” states
that “The minimum turnover rate shall be a single turnover of the full volume of
the pool water, within the period that the pump would normally be operating….”
The tables below provide a guide only to the running times of your pump
while in filtration mode in order to achieve the minimum turnover rate:
SP200BTP
Pool Size
(Gallons)
Speed Setting (hours)
Speed 1
Speed 5
Speed 10
5,284
3.3
1.7
1.1
7,925
5.0
2.5
1.7
10,566
6.7
3.3
2.2
13,208
8.3
4.2
2.8
15,850
10.0
5.0
3.3
21,133
13.3
6.7
4.4
26,417
16.7
8.3
5.6
