Davey ChloroMatic MC16C Installation & Operating Instructions Manual Download Page 20

Davey

®

 Repair or Replacement Guarantee

In the unlikely event in Australia or New Zealand that this Davey product develops any malfunction within warranty 
periods beginning from the date of original purchase due to faulty materials or manufacture, Davey will at our 
option repair or replace it for you free of charge, subject to the conditions below.

Should you experience any difficulties with your Davey product, we suggest in the first instance that you contact 
the Davey Dealer from which you purchased the Davey product. Alternatively you can phone our Customer 
Service line on 1300 367 866 in Australia, or 0800 654 333 in New Zealand, or send a written letter to Davey at the 
address listed below. On receipt of your claim, Davey will seek to resolve your difficulties or, if the product is faulty 
or defective, advise you on how to have your Davey product repaired, obtain a replacement or a refund.

Your Davey Guarantee naturally does not cover normal wear or tear, replacement of product consumables (i.e. 
mechanical seals, bearings or capacitors), loss or damage resulting from misuse or negligent handling, improper 
use for which the product was not designed or advertised, failure to properly follow the provided installation and 
operating instructions, failure to carry out maintenance, corrosive or abrasive water or other liquid, lightning or 
high voltage spikes, or unauthorized persons attempting repairs.  Where applicable, your Davey product must only 
be connected to the voltage shown on the nameplate.

Your Davey Guarantee does not cover freight or any other costs incurred in making a claim. Please retain your 
receipt as proof of purchase; you 

MUST

 provide evidence of the date of original purchase when claiming under 

the Davey Guarantee. 

Davey shall not be liable for any loss of profits or any consequential, indirect or special loss, damage or injury 
of any kind whatsoever arising directly or indirectly from Davey products. This limitation does not apply to any 
liability of Davey for failure to comply with a consumer guarantee applicable to your Davey product under the 
Australian or New Zealand legislation and does not affect any rights or remedies that may be available to you 
under the Australian or New Zealand Consumer Legislation.

In Australia, you are entitled to a replacement or refund for a major failure and for compensation for any other 
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods 
fail to be of acceptable quality and the failure does not amount to a major failure.

Should your Davey product require repair or service after the guarantee period; contact your nearest Davey Dealer 
or phone the Davey Customer Service Centre on the number listed below.

For a complete list of Davey Dealers visit our website (davey.com.au) or call:

*  Installation and operating instructions are included with the product when purchased new. 

They may also be found on our website.

P/N MMAN008-5 supersedes P/N MMAN008-4

AUSTRALIA
Davey Support Centre

6 Lakeview Drive,

Scoresby, Australia 3179

Ph: 

1300 367 866

Fax: 

1300 369 119

Website: davey.com.au

Davey Water Products Pty Ltd
Member of the GUD Group
ABN 18 066 327 517

NEW ZEALAND
Davey Support Centre

7 Rockridge Avenue,

Penrose, Auckland 1061

Ph: 

     0800 654 333

Fax:         09 527 7654

Website: daveynz.co.nz

® Davey & ChloroMatic are registered trade marks of Davey Water Products Pty Ltd.
© Davey Water Products Pty Ltd 2012.

Davey Guarantee Period

Power Supply - Two Years                         pH Pump Module - One Year

 

 

Electrolytic Cell - Three Years                      Sensor Probe - Three Years 

Summary of Contents for ChloroMatic MC16C





















Reviews: