Dave Smith Instruments Temptest, Operation Manual, Page: 86 / 100

76 System Settings Dave Smith Instruments
When set to Disabled, the l
atCh
o
n
buttons simply switch between FX1 and
FX3 or FX2 and FX4 and the latch function is disabled.
For more details about
l
atCh
o
n
, see “Real Time FX” on page 35.
5 . Envelope Amount Encoder behavior: Normal, Shift Switched—
In
Shift Switched mode, the un-shifted ( a
mount
) and shifted ( v
eloCity
a
mount
)
behaviors are swapped. That is, when S
hift
is off, the encoder controls v
eloCity
a
mount
and when on, a
mount
.
6 . Select Sound behavior: Shift On + Pad, Shift Held + Pad—
The default
behavior is S
hift
Held + Pad. To select a Sound for editing without playing the
Sound, hold S
hift
down and press the desired pad. When set to Shift Held + Pad,
the pads can still be played when S
hift
is on.
When set to Shift On + Pad, S
hift
must either be on or held down to select the
Sound.
7 . Tap Tempo behavior:
Shift On + Play, Shift Held + Play—
With
Tempest’s default behavior (Shift Held + Play), must be held to tap the tempo.
Otherwise, Play starts/restarts the Beat, whether S
hift
is on or not. When set to
Shift On + Play, Play is used to tap the tempo when S
hift
is either on or held
down.
System: System Actions
1 . Calibrate Analog Oscillators and Filters:
Tempest’s analog waveshapes
and filters are calibrated at the factory and should not need to be recalibrated
unless you are experiencing problems.
2 . Calibrate Slider 1 and 2 Position:
Tempest’s Sliders are calibrated at the
factory and should not need to be recalibrated unless you are experiencing prob-
lems.
3 . Calibrate Drumpads:
Tempest’s Sliders are calibrated at the factory and
should not need to be recalibrated unless you are experiencing problems.
4 . Reset System Parameters:
Resets all the system parameters to their default
values.
5 . Show System Information:
Displays the current versions of the operating
systems.