Dave Smith Instruments Temptest Page 95 Operation Manual Download

Page: 95 / 100

Tempest Operation Manual

Support

Support

Troubleshooting

Here are a few suggestions for resolving problems that may occur.

The sequencer has stopped running.

Make sure MIDI: Clock Mode in the System menu is set to Auto, Master,

or Off, or—if set to Slave—that MIDI: Clock In is set to MIDI Port or USB

and that MIDI clock is actually available to that port.

An oscillator or filter sounds strange or out of tune.

In the System menu, choose Calibrate Analog Oscillators and Filters.

Note:

It is not necessary to run the calibration routine on a regular basis.

You should only run it if you are experiencing problems.

The Real Time FX sliders are not behaving as expected or don’t

seem to go full range.

In the System

menu, choose Calibrate Slider 1 and Slider 2 Position and

follow the inst

ructions to calibrate the sliders.

Still experiencing a problem?

From the System menu, choose Reset System Parameters.

Contacting Technical Support

If you are still having a problem with Tempest, contact Technical Support at

[email protected].

Please include your Tempest’s serial

number, the versions of the operating systems (from the System menu, choose

Show System Information), and the purchase date.

you have not already reset the Global parameters and run the calibration

routine (see “Troubleshooting,” above), you should do it before contacting Technical

Support. It’s probably the first thing they’ll ask you to do

Summary of Contents for Temptest





































































































Search results

Summary of Contents for Temptest

Reviews:

Related manuals for Temptest

Brands by name

Popular brands

Dave Smith Instruments Temptest, Operation Manual

Search results

Summary of Contents for Temptest

Reviews:

Related manuals for Temptest

Brands by name

Popular brands