Dave Smith Instruments Sequential PROPHET X, User Manual, Page: 81 / 172

69 Prophet X User’s Guide Sequencer
6. To save the sequence, save the program by pressing the
save
/
load
button twice.
Sequencer Parameters (Front Panel)
Record: On, Off—
This switch turns sequencer recording/editing on and
off on the polyphonic sequencer.
Play: On, Off—
This switch starts and stops polyphonic sequencer playback.
Additional Sequencer Parameters (Display Menus)
Additional sequencer parameters are found in the menus in the main
display. To see these, press the
record
button on the front panel.
CHORD NOTE
Chord Note Note Step Velocity
STEP
1 C5 100 1
VELOCITY NOTE
Set Length Tie Rest
The Sequencer menu
Chord Note:
1...6—
The sequencer can record up to 6 notes per step (i.e.,
a 6-note chord). The
chord note
parameter lets you select a specific note
within a chord for editing. Notes are listed from lowest to highest.
Step: 1...64—
Selects a specific step within the sequence for editing.
Note : C0...C10—
Sets the note value of the current step.
Velocity
: 1...127, Rest—
Sets the velocity of the current step. Turning the
knob fully clockwise sets the step to
rest
.
Tie —
Pressing Soft Key 1 adds a tie to the current step.
Rest —
Pressing Soft Key 2 adds a rest to the current step.
Set Length —
Using Soft Knob 2 to navigate to a specific step then press-
ing Soft Key 3 resets the length of the sequence so that it will end after
the selected step.