Dave Smith Instruments Sequential PROPHET X, User Manual, Page: 77 / 172

65 Prophet X User’s Guide Arpeggiator
Clock Parameters
BPM: 30…250—
Sets the tempo for the arpeggiator in BPM (beats per
minute). The
tap tempo
LED flashes at the BPM rate. When
lfo sync
is
enabled on the low-frequency oscillator, or
clk sync
is enabled in the Effects
section, the BPM rate affects the LFO frequency and/or delay effect. When
syncing to an external MIDI clock source, the BPM setting has no effect.
Clock Divide —
Selects a basic note value relative to the BPM. See the table
below:
Name Tempo Timing Division
Half BPM/2 Half note
Quarter BPM Quarter note
8th BPM x 2 Eighth note
8 Half BPM x 2 Eighth note, half swing timing
8 Swing BPM x 2 Eighth note, full swing timing
8 Trip BPM x 3 Eighth note triplets
16th BPM x 4 Sixteenth note
16 half BPM x 4 Sixteenth note, half swing timing
16 Swing BPM x 4 Sixteenth note, full swing timing
16 Trip BPM x 6 Sixteenth note triplets
32nd BPM x 8 Thirty-second note
32 Trip BPM x 12 Thirty-second note triplets
Tap Tempo —
Pressing the
tap tempo
button 4 times sets the tempo. The
LED flashes at the BPM rate you set.