Dave Smith Instruments Sequential PROPHET X, User Manual, Page: 23 / 172

11 Prophet X User’s Guide Chapter 1: Getting Started
To turn on Stack mode:
• If it’s not currently lit, press the
stack
button. The button becomes
lit. The program on Layer B is stacked with the program on Layer A.
Polyphony is halved since two voices are used per note.
To turn off Stack mode:
• If it’s currently lit, press the
stack
button. The button becomes unlit.
Only the program on Layer A is heard.
To edit Layer B:
1. Press the
edit layer b
button. Layer B editing is enabled.
2. Change any parameters to change the sound of Layer B.
3. Press the
edit layer b
button again to turn off Layer B editing.
To edit Layer A and B simultaneously:
1. With Stack mode on (
stack
button is lit) press and hold the
edit layer
b
button until it begins flashing, indicating that you are in “Link” mode.
Release the button. (It should still be flashing.)
2. Change any parameters. The parameters are changed on both Layer A
and Layer B.
3. To turn off Link mode, press the
edit layer b
button again. It stops
flashing.
Saving a program saves any edits to programs on both Layer A and Layer B.
To copy Layer A to Layer B:
1. Press the
edit b layer
button.
2. Press Soft Key 1 (
copy a
>
b
) .
3. Press Soft Key 1 again to confirm. Layer A is copied to Layer B.
To copy Layer B to Layer A:
1. Press the
edit b layer
button.
2. Press Soft Key 2 (
copy b
>
a
) .
3. Press Soft Key 1 to confirm. Layer B is copied to Layer A.