Dave Smith Instruments Evolver, Operation Manual

Page: 36 / 64

36
In Peak Amt: 7 3 S -99…+99 Amount of Peak Hold modulation. Takes the
momentary peak of the left external audio input, and uses it as a modulation signal.
Destination: 7 4 S see table Peak Mod Destination - see the Modulation
Destination table on page 38 for a list of possible destinations.
Env Fol Amt: 7 5 S -99…+99 Amount of Envelope Follower modulation.
Generates an envelope from the Left external audio input, and uses it as a modulation
signal.
Destination: 7 6 S see table Envelope Follower Destination - see the Modulation
Destination table on page 38 for a list of possible destinations.
Velocity Amt: 7 7 S -99…+99 Amount of MIDI Velocity modulation. The
Velocity of the most recent MIDI note is used.
Destination: 7 7 S see table Velocity Destination - see the Modulation
Destination table on page 38 for a list of possible destinations.
Mod Wheel Amt: 8 1 S -99…+99 Amount of MIDI Mod Wheel modulation.
This parameter has a smoothing filter, which will clean up messy MIDI controller data
into a clean response. If you want to bypass the filtering, use one of the four General
Purpose Modulation sets, which are unfiltered.
Destination: 8 2 S see table Mod Wheel Destination - see the Modulation
Destination table on page 38 for a list of possible destinations.
Pressure Amt: 8 3 S -99…+99 Amount of MIDI Pressure modulation, either
poly or channel pressure. This parameter has a smoothing filter, which will clean up
messy MIDI controller data into a clean response. If you want to bypass the filtering,
use one of the four General Purpose Modulation sets, which are unfiltered.
Destination: 8 4 S see table Pressure Destination - see the Modulation
Destination table on page 38 for a list of possible destinations.