SM5060 EXERCISE SUPER COMPUTER WITH LCD DISPLAY
OPERATING INSTRUCTIONS FOR SM5060 SUPER COMPUTER
BATTERIES
Open the battery compartment at the rear of the computer and install 4 x C batteries. If the
LCD is not clear and only partial segments are displayed then remove the batteries, wait 15 seconds,
and reinstall them. If the problem persists then install new batteries. If new batteries do not fix the
problem then consult your retailer. Under normal use the batteries will last 6 months. AC adaptor socket
for 6 volt @ 100mA AC adaptor, fitted on back of case, optional.
POWER ON
The power will automatically turn on when the batteries are installed or the any key is
pressed or the computer receives a speed signal.
AUTO POWER OFF/ON.
As long as you are working out the computer will operate. If there is not input
for 1 minute then the computer will automatically turn off. All existing values will be held until the
computer is powered up again.
COMPUTER KEY FUNCTIONS
START STOP KEY.
By pressing this key the computer will START and STOP. When the computer is in
the stop mode STOP will be displayed. If no sensor input is detected for 4 seconds the computer will
ENTER key to
confirm selection
RECOVERY key to
activate recovery
function
SELECT KEYS
RESET key to
clear training data
START STOP KEY
MAIN DISPLAY
RESISTANCE
DISPLAY
PROGRAM
PROFILE CHART
BAR GRAPH
REMOTE AND WATER
BOTTLE HOLDER
BOOK RACK
