pag
. 15
> Ensure that no tools or other foreign bodies are inside the machine or plant.
> Check that the device and all other parts are secure.
> Check that all connections are on the correct ports and are secure.
> Check that the set pressures correspond to the ratings and connection values of the device.
> Check that safety devices are working.
1. Switch on power supply.
2. Switch on material flow.
3. Turn on device at plant controller.
4. Check that device is functioning and operating correctly.
5. Check that device is within all the specified set value ranges.
Once it has been established that the device is functioning perfectly, the device may be operated in accordance with all
accident prevention regulations.
DISPENSING VALVE DA 600
Observe the following before putting the machine or plant into operation:
WARNING! Danger from material and substances!
There is a risk of coming into contact with or absorbing coating substances and/or cleaning fluids.
There is also a risk of inhaling fumes from fluids. Under some circumstances, this can cause lasting
damage.
Always wear personal protective equipment when working on the device!
Make sure there is enough forced or natural ventil ation.
Obtain medical advice if symptoms are noted!
To prevent disruptions, device function must be checked regularly by trained supervisors.
5.1 General and safety instructions for operation
5 OPERATION
IMPORTANT!
In the event of faults or irregularities, shut down the plant immediately and inform the local person in charge.
!
If device faults cannot be corrected (see chap. 7 “Faults”), inform the manufacturer’s Customer Service.
Only deploy instructed personnel for regular cleaning.
The device presents the following hazards during operation:
WARNING! Risk of injury!
Danger from the device out high high-pressure fluids. Always wear personal protective
equipment when working on the device device!