background image

When using it for the first time or when using it after a period of rest, 
please do a skin patch test on the areas of intended use to check if your 
skin is susceptible to skin irritation from using this product.

Skin Tone Chart

Intensity Level Setting

Please check the “Skin Tone Chart” and use the recommended Intensity Level 

according to your skin pigmentation color or an Intensity that is suitable for you 

(no pain felt). If an “X” mark is shown under your category, your skin tone is  

not suitable to use this product.  

Intensity Levels differ according to the areas treated. Please use a Intensity level   

setting that is suitable and does not burden your skin. Feeling warmth and heat   

from each shot is acceptable but if it starts to feel painful, please do not use   

that Intensity setting. If your skin is more pigmented, it is more susceptible to   

absorb heat and increases the chance of skin problems thus a lower Intensity   

setting is recommended. With regards to skin problems, please refer to page 4 

 “Skin  Trouble”.

Intensity

Level

Light Skin Tone 
Skin Type 1 

Translucent, 

Bright Skin Color

Redness will

appear when

exposed to

strong sunlight

but sunburns

subside fast

Beige Tone 
Skin Type 2 

Bright Skin

Color
Comparatively

easier for skin

to get red

when exposed

to strong

sunlight and 

Low-Medium 

Skin Tone 

Standard Skin

Tone

Easily gets red

when exposed

to strong 

sunlight, but

subsides 

relatively fast

sunburns 

usually do not 

leave a color 

Skin Type 3 

and skin color

will darken

after

Medium Skin 
Tone 

Milk Chocolate

Color

Redness do

not appea

when exposed 

to strong sunlight

instead skin 

color 

Skin Type 4 

immediately

darkens

Medium-Dark

Skin Tone 

Brown Color 

Skin

Redness do

not appear 

when exposed

to strong 

sunlight,  

instead skin 

Skin Type 5 

color

immediately

darkens and 

Dark Skin  
Tone 

Easily gets

sunburnt

Skin Type 6 

sunburn color

remains 

Please refer and read page 14 “If you fall within this category, please do not use     

this product” to check if this product is suitable for you to use. Especially if you      

use natural light or artificial methods for skin tanning, your current skin tone may      

be darker than your original skin tone. Please check the “Skin Tone Chart” above     

to perform a skin test and set it to the appropriate Intensity Level.     

CAUTION

Please refer to page 4 "Please do not use this product on the 
areas below" to check which areas this product should not 

be used on. 

 If severe pain occurs during use, please lower the Intensity 

 Level. If you notice redness or skin problems, stop using it 

immediately. For more information, please refer to “About 

Skin Trouble” on page 6.

Summary of Contents for Home Edition





















Reviews: