DATREND Systems vPad-XSC, User Manual

Page: 16 / 37

vPad-XSC for Impulse 4000 USER MANUAL
Table 1 lists the permitted values for the
“lim”
command. Additionally, any limit type can be set to
“
none
”, which disables automatic assessment for the affected test types. If the Interface receives a limit
configuration command with a disallowed limit type, that particular limit will be disabled.
Note that the units of measurement are assumed when specifying a limit value.
TABLE 1: Allowed Values for Limit Configuration
lim < limit_ID >, < limit_type >, < param_1 >, < param_2 >
TEST LIMIT ALLOWABLE VALUES in bold
defib energy 1
target 0 to 999 %/J percent or units
range 0 to 999 J 0 to 999 J
defib charge
time
2 max 0 to 32000 s -
defib sync
delay
3
min 0 to 32000 ms -
max 0 to 32000 ms
-
range 0 to 32000 ms 0 to 32000 ms
pacer pulse
current
4
target 0 to 999 %/mA percent or units
range 0 to 999 mA 0 to 999 mA
pacer pulse
rate
5 target 0 to 999 %/PPM percent or units
pacer pulse
width
6 target 0 to 999 %/ms percent or units
N/A
7
pacer paced
refractory
period
8
min 0 to 32000 ms -
max 0 to 32000 ms -
range 0 to 32000 ms 0 to 32000 ms
pacer sensed
refractory
period
9
min 0 to 32000 ms -
max 0 to 32000 ms -
range 0 to 32000 ms 0 to 32000 ms
Operation/Chapter 3
#
Page 7