Pressure Module, M-P and Pressure Temp Module, M-PT
Document No. 800 1013-1
1
INTRODUCTION
This section provides information for the maintenance and service of the Pressure Module, M-P,
and Pressure Temp Module, M-PT. The M-P and M-PT modules are single width plug-in modules
designed for use with the S/5 monitors. Both modules provide invasive pressure measurement.
Additionally, the M-PT-module provides temperature measurement. The M-PT module also has a
connector for direct ECG and pressure signal output.
NOTE: Do not use identical modules in the same monitoring system. The modules M-P and M-PT
are considered as identical modules.
Figure 1
Datex-Ohmeda M-PT and M-P Module