MONITOR KEYS AND MENUS
You can control monitoring with the ComWheel, direct access keys, or the Remote Control. The ComWheel, the main navigating tool,
provides access to all menu functions. With the direct access keys, you can control most frequently-used functions.
1
2
3
4
5
6
7
8
9
(1) Power On/Standby key
NOTE: The monitor will start only when connected to mains power.
(2) Silences an active alarm or pre-silences all alarms for two minutes (press
the key once) or for five minutes (press the key for three seconds). To clear
the alarm message field of all alarm messages and to enable new alarms,
press the key again.
(3) Displays numerical or graphical trends, and snapshots.
(4) Displays the
Invasive Pressures
menu to adjust Invasive Pressure
measurement settings.
NOTE: Depending on the options, this key may be
Pulse Oximetry
or
NMT
.
(5) Displays the
ECG
menu to adjust ECG measurement settings.
(6) Displays the
NIBP
menu to adjust NIBP measurement settings.
(7) Starts a single non-invasive blood pressure measurement or cancels single
NIBP measurement,
STAT
and manual measurements, and stops venous
stasis.
(8) Returns to normal monitoring display.
(9) ComWheel. Menu functions are controlled by turning and pressing the
ComWheel. Opens the
Main Menu
when no other menu is displayed
.
Silence
Alarms
Trends
Invasive
Pressures
ECG
NIBP
NIBP
Start/Cancel
Normal
Screen
– 9 –
