Command Boards / Bars, Remote Controller
Document No. 8001589 -1
5
2.2
Remote Controller, K-REMCO
The Remote Controller consists of 12 direct function keys and the ComWheel.
K-REMCO PCBs
The K-REMCO has two PCBs located inside the Remote Controller. One board has only the
pushbutton switches of the keys. The other board reads the status of the keys and the ComWheel
and forwards the information to the CPU board.
External communication
K-REMCO with standard cable:
Communication with the host processor takes place in RS232 serial communication channels
which are available in both the CPU bus and the module bus. Two signals, TXD and RXD, are in use.
No handshaking is used. The 26-pin subminiature D-connector of the Remote Controller is
connected to a Display controller board. Serial communication speed is 19.2 kbps.
K-REMCO with optional Remote Controller - Compact Monitor cable:
The Compact Monitor or LCD display, D-LCC10A/W converts the communication to RS232 format
(see above).
ComWheel
The ComWheel is used for menu selection.
Summary of Contents for AS/3 K-ANE
Page 2: ......
Page 28: ...S 5 Keyboards Document No 8001589 1 24 ...
