16
Introduction
SPL2(TS) and SPL3(TS) user manual
EN
Technical specifications
INPUTS
MIC (measuring microphone).......................... XLR-3 female, electronically balanced, use only the
supplied microphone
LINE (left & right) ............................................ XLR-3 female, electronically balanced
Signal level ............................................ -14 .. +6 dBu
Input impedance .................................... 10 kOhm
OUTPUTS
LINE (left & right) ............................................ XLR-3 male, electronically balanced
Output impedance ................................. 600 Ohm
GENERAL
AUDIO
Frequency response .............................. 20 Hz .. 20 kHz
Signal/noise ratio ................................... > 80 dB
THD+N .................................................. < 0.05 % (CCIR-RMS)
LIMITING
Limiter threshold (adjustable)................. -14 .. +6 dBu (without measuring microphone)
Limiter threshold (adjustable)................. 80 .. 120 dBA (with measuring microphone)
Output reduction (adjustable)................. 0 .. -40 dB (without measuring microphone)
EXTERNAL SIGNALLING
External attenuation ............................... 0 .. -20 dB (10 kOhm variable resistor)
Signalling- and switch outputs................ 20 V / 10 mA DC
POWER SUPPLY
Supply voltage ....................................... 220...240 VAC / 50 Hz
Power consumption ............................... 10 W (SPL2 / SPL3), 20 W (SPL2TS / SPL3TS)
SIZE AND WEIGHT
Front ...................................................... 483 x 45 mm (B x H) = 19”, 1HE
Depth..................................................... 175 mm
Weight (net.) .......................................... 3.2 kg (SPL2 / SPL3), 3.5 kg (SPL2TS / SPL3TS)
Product support
For questions about the SPL limiter series, accessories and other products, please contact:
Dateq Audio Technologies B.V.
De Paal 37
1351 JG ALMERE
The Netherlands
Telephone:
+31 36 54 72 222
Fax:
+31 36 53 17 776
E-mail:
Internet:
www.dateq.nl
