EN
SPL2(TS) and SPL3(TS) user manual
Installation
5
Tip
Never try to use the SPL3/3
TS
in music-mode and live-mode at the same time, for example by
feeding some of the bands' instruments through the limiter, while other instruments remain
uncontrolled (percussion!). The limiter will unjustly try to reduce the level of only the instruments it is
able to reduce, so the whole balance of the mix will be disturbed. Another problem of using both
modes at the same time is that the WARNING-output will be disabled when signal is applied to the
limiter. This is done because otherwise the WARNING-lamp will blink continuously in music-mode,
since the limiter will always try to reach maximum sound pressure level when the input-threshold has
been reached.
