Dateq Qfm, User Manual

Page: 13 / 16

NL
Qfm handleiding Technische specificaties
8
Output 4 Output 3 Output 2 Output 1 Program type
0 0 0 0 No PTY available
0 0 0 1 News
0 0 1 0 Current affairs
0 0 1 1 Information
0 1 0 0 Sport
0 1 0 1 Education
0 1 1 0 Drama
0 1 1 1 Culture
1 0 0 0 Science
1 0 0 1 Varied
1 0 1 0 Pop
1 0 1 1 Rock
1 1 0 0 Easy listening
1 1 0 1 Light classics
1 1 1 0 Serious classics
1 1 1 1 Other
= Speech program
= Music program
The outputs are opto-couplers outputs. The maximum current through the outputs is
40mA; the maximum voltage over the outputs is 30V.
Reading data from the tuner
When the RDS-window is enabled (‘Options’
Æ
‘Show RDS window’) it is possible to read the
RDS data of all four tuners. The PTY info can be
show by pointing at the RDS-window.
When the text ‘Preset’ is double-clicked the
current preset can be changed.
Qfm operation
The headphones output can be used to monitor the signal of the currently selected
tuner. The tuner number is showed in the display. To switch to another tuner simply
press the + or the - key on the Qfm-front.
Selecting a preset
To select a preset push the PSet key. The LCD-screen shows the selected tuner,
and the preset number with the corresponding frequency. Now press +, or - to scroll
through the presets. Push the PSet key again to return to the main menu.
Adjusting the preset
Pushing the Freq key adjusts the frequency of the currently selected preset. The
LCD-screen shows the preset number and the frequency. By pushing the + and - key
the frequency can be adjusted. To store the new frequency push the Freq key again.
When the Freq-key is not pressed the frequency will not be stored into the memory,
and the Qfm will display the default screen after some time. When the tuner is
switched off, or another preset is selected the manually selected frequency will be
discarded.
Note: the keys on the front can be disabled by the software…
L
OGICAL
OUTPUTS
1 2 3 4