User’s Manual
31
4.3. Generating a graphic image
Generating a text
The command is used for inserting textual information in the
image.
Format:
Aa,b,c,d[*],e,f,g,[*]h
a
Starting coordinate on X for the upper left angle of the
text: 0 - 2047.
b
Starting coordinate on Y for the upper left angle of the
text: 0 - 4095.
c
Text orientation: 0=0o, 1=90o, 2=180o, 3=270o
where rotation is clockwise.
d
Font selection, where the following values are
possible:
0:
12x24 dots
1:
8x12 dots
2:
10x16 dots
3:
12x20 dots
4:
14x24 dots
5:
32x48 dots
6:
24 x 24 dots Hangeul or Chinese font
(For Korean or Chinese version only)
d
can be a Latin letter in which case it is a name of a
loadable font. The size of the symbols is there
contained. Around each of the in-built fonts there is a
white frame 1 dot wide so that the printable size is
actually 2 points bigger than the size stated above.
e
Selection of a multiplier for X of the font. Possible
values are 1 - 8.
f
Selection of a multiplier for Y of the font. Possible
values are 1 - 9.
g
Printing mode
: N
- normal,
R -
inverted,
B
- bold,
W -
inverted bold. The loadable font can be printed only
in a normal mode.
h
Text data.
The format for generating a text and a bar
code is the same and is described further on.
If code table
11
(Hebrew) or
12
(Arabic) is selected,
the text is printed from right to the left. You can change
the print direction placing the symbol ‘*’ before the text
