Datecs EP-50H, Service Manual, Page: 8 / 40

8
1 DATECS
LP/EP-50H
2. Removing the Screws from the Bottom of the Main Body
y
Turn over the printer body.
y
Remove two M3
×
10 (BT) screws.
Then, turn back the printer body to its
original position.
Do this, holding its upper and bottom covers.
3. Detaching the Printer Cover and Paper Roll
y
Detach the printer cover. Put a finger, etc.
on a convexed part from the rear of the printer
body and lift.
y
Detach the paper roll. If the paper roll has been set
in the printer, cut he surplus paper and detach
it gently.
See “HOW TO REMOVE REMAINING PAPER
ROLL” in the USER’S MANUAL.
4. Detaching the Platen Roller Unit
y
Raise the head-up lever.
y
Unlock the platen roller unit. Pull up the blue
levers on both sides of the platen roller unit,
while opening them outside.
y
Detach the platen roller unit. Hold the blue levers
on both sides of pull up. Keep the platen
unit carefully so as not to damage it.
y
Lower the head-up lever.