Datecs
USERS MANUAL
21.06.2011
6
LOADING THE PAPER
Loading the paper into DP-55D:
A/ Remove the printer cover;
B/ Set the paper roll ;
C/ Pull the paper tape out about 10cm;
D/ Turn the cover back to its place.
E/ To move the paper use
till the tape shows up over the slot;
F/ Press the key <C>.
MODES OF OPERATION
The ECRs working mode can be set when on the display is shown:
O F F
by pressing the key:
1
REG
'REGISTRATION', Registering of the sales;
2
X
'X REPORTS', Reports of the ECR;
3
Z
'Z REPORTS', Reports of the ECR with clearing;
4
PGM
'PROGRAMMING', Programming of the ECR settings;
5
S
Service mode (available If the service jumper is activated)
6
GPRS
Configuration GPRS (available If the service jumper is activated)
7
FM
Read FM (available If the service jumper is activated)
8
T
Control tests ;
9
OFF_LINE Programming and reporting from PC
.
Showing the battery voltage and the current date and time.
0
Turning off the ECR when it is in 'OFF' mode.
The operators have no equal rights when accessing the modes. The access permissions are:
Operator
⇒
Mode
⇓
⇓
⇓
⇓
1-24
25,26
27,28
29,30
1 REG
+
+
+
+
2 X
-
+
+
+
3 Z
-
-
+
+
4 PGM
-
-
-
+
8 Test
+
+
+
+
9 OFF-line
+
+
+
+
After pressing a key to choose a mode, if the mode requires password, on
the display is shown a prompt for operator’s password. To access the
mode, the operator should enter his password and then to press the
<TOTAL> key.
FJALEKAL--------
R
