Datecs
USERS MANUAL
21.06.2011
18
MODE Z – REPORTS WITH CLEARING
1. In order to access the mode Z from the ‘OFF’ state - press the key '3'.
2. In the left upper side on the display the letter 'Z' appears and on the next row an
invitation for password is shown. Enter the numeric keys password sequence and
press TOTAL.
DP1 STL TL
Z
If Tabl 2, Field 7 = 0,
Field 5 = 0
If Tabl 2, Field 7 = 1,
Field 5 = 0
If Tabl 2, Field 7 = 1,
Field 5 = 1
If Tabl 2, Field 7 = 0,
Field 5 = 1
DP1 PLU STL TL
Z
DP1 STL TL
Z
DP1 DP4 STL TL
Z
D1 D4 PLU STL TL
Z
TL
Daily report and clearing ;
After the reports are printed, the registers involved are cleared automatically.
When the field 7 of table 2 is set to 1, the turnovers and quantities of the items,are also cleared.
STL
Reporting and clearing the operators debts.
On the display is shown ‘ 1 – 30 ‘. The report can be executed for all operators ( by pressing
<TOTAL> only) or for separate operator by entering operators number and after pressing
<TOTAL>.
In the report are included and after cleared:
- the turnovers by sales, surcharges and discharges
- the turnovers divided by payment types
- the turnovers from 'void'/'correction' operations
DP1
Periodical report by the payments.
DP4
Clearing the archive
PLU
Reporting and clearing the turnovers and the quantities of the items.
This report is available only when the field 7 from table 2 is set to 0.