Datecs
USERS MANUAL
21.06.2011
10
Example: Programming the name and the price of an item
1.Make daily financial report (‘OFF’,3,password,<TOTAL> )
2.Enter into mode for programming of main parameters (‘OFF’,4,password, <TOTAL>,1)
3.The initial position is Table 1 field 1 row 1 ( editing of item parameters). On the
display are shown the name of the current item and the address value.
1.0001.01.04
ART 1
Note: When the symbol "=" is shown in the left lower corner on the display, this indicates non-zero turnover for this
item. In this case it is allowed the price for this item to be changed. In order to change the other item parameters
the turnover must be cleared.
4. Press key <%+> in order to move on the field 13 – the item's name in albanian language;
5. Press key <STL> in order to move in “editing” mode;
6. Enter the name of the item (”BUKA”) as the follows:
B
8
,
8
U
2
,
2
K
5
,
5
A
8
7. Accept the writing by pressing <TOTAL>;
8. Press key <%+> in order to move on the field 14 – the item's name in serbian language;
9. Enter the name of the item (”HLJEB”) as the follows:
H
4
,
4
L
5
,
5
,
5
J
5
,
E
9
,
9
B
8
,
8
10.
Press key <%+> in order to move on the field 15 – the item's name in english language;
11. Enter the name of the item (”BREAD”) as the follows:
B
8
,
8
R
1
,
1
,
1
E
9
,
9
A
8
D
9
12. Accept the writing by pressing <TOTAL>;
13. In order to program the price move to the next field by pressing the key <%+>;
14. Enter the price (The position of the decimal point always is fixed and can not be programmed when the price
field is changed);
15. To accept the new value, press the <TOTAL> key.