Datcon DT4120 PS Series, Operating Instructions Manual

Page: 54 / 92

DT4120 xx xx (PS)
54
20170324-V0
7.13. Limit output state display mode (12. menu item)
Function The state of limit outputs may present on the display. Here
you can set the condition of presenting the states. [Factory
default: dynamic]
Sequence of operations 1. Enter the menu by typing the user or supervisor code.
The way the code should be type in is described in Chapter
7.1. You see this on the display:

.
2. Keep stepping by pressing the ▲ button as long as you
see this menu item:

( L imit Di splaying = limit
displaying).
3. Enter the menu item by pressing the
ENTER button.
4. You see this on the display:

. The mnemonic is
blinking, signaling that it can be modify.
5. Pressing
▲ button select the displaying mode.
You can choose from the following:
•


( Dynam ic = dynamic)
It displays the limit output state as far as the ENTER button
is pressed. [Factory default]
•


( Timed = timed)
It displays the limit output state as far as the ENTER button
is pressed and 2.5 sec. long after releasing button.
•


( Stati c = static)
Pressing ENTER button the limit output display can be
switch on or switch off.
•


( Chang ing = changing)
Changing the state any of the limit outputs (switch on or
switch off) it displays the state automatically for 2.5 sec.
long.
Keeping the
ENTER button pressed it displays the
measuring value.
•


( Perio dical = periodical)
It changes between the limit display and measuring display
mode in 2.5 sec. period.
Keeping the
ENTER button pressed it displays the
measuring value.