DT4120 xx xx (PS)
74
20170324-V0
22. You see this:
. The number is blinking,
signaling that it can be modify.
23. Pressing the
▲
button you can set the decimal point
position:
•
= 2 decimal [Factory default]
•
= 1 decimal
•
= 0 decimal
•
= 4 decimal
•
= 3 decimal
24. After setting exit from this menu item by pressing
MENU
button. You can see
on the display.
Assign 0% to any
physical value (scaling)
Sequence of operation
You can assign potentiometer 0-100% range to a desired
physical range.
25. Keep stepping by pressing the
▲
button as long as you
see this menu item:
(
P
otentiometer
S
cale
000%
=
potentiometer scaling 0%).
26. Enter the menu item by pressing the
ENTER
button.
27. You will see:
. on the display. The number on
the left is blinking, signaling that it can be modify.
28. Pressing the
►
button you can step to the nex digit.
29. Pressing the
▲
button you can increase the value of the
blinking digit:
,
,
,
,
,
,
,
,
,
,
, etc.
30. When the digit on the left side is selected pressing the
▲
button the sequence is as follows:
,
,
,
,
,
,
,
,
,
,
,
, etc. so you
can set any number between -9999-99999.
31. After setting exit from this menu item by pressing
MENU
button. You can see
on the display.
Summary of Contents for DT4120 PS Series
