PocketSurfer
-7-
Chapter 2: Important safety information
Care and Maintenance
Your PocketSurfer is a product of superior design and craftsmanship and
should be treated with care. The suggestions below will help you to fulfill any
warranty obligations and allow you to enjoy this product for many years.
When using your PocketSurfer, phone, battery, charger, OR any accessory:
• Keep it and all its parts and accessories out of small children’s reach.
• Keep it dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use or store it in dusty, dirty areas as its moving parts can be
damaged.
• Do not store it in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store it in cold areas. When the phone warms up (to its normal
operating temperature), moisture can form inside the phone, which may
damage the PocketSurfer's electronic circuit boards.
• Do not attempt to open it. Non-expert handling of the device may damage
it.
• Do not drop, knock or shake it. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean it. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint it. Paint can clog the device’s moving parts and prevent proper
operation.
• Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications or attachments could damage the PocketSurfer and
may violate regulations governing radio devices.
• If the PocketSurfer, phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for service.
