
PocketSurfer
-12-
Charging the Battery
The battery that has been installed in the PocketSurfer will allow you to perform any of your online
functions for over four straight hours on the color version. Charging time should be five hours for
the color unit.
Also, the battery installed in both devices is lithium based, which means that it is possible to
recharge the battery at any time without altering the lifetime of the battery. Still it is recommended
that you let your battery discharge fully before recharging it again.
In order to charge the device correctly:
1. Connect the charger on your wall socket.
2. Proceed to plug the device on the top right hand side (middle right hand side for the black &
white device).
A red light will appear on the power indicator of the device. This indicates that the device is
correctly connected and is being charged.
Note: The red light will not change color when the device is fully charged, that is why it is important
to know the time requirements for charging a device completely.
After turning on your device, there should be a green light on the power indicator, and it should be
possible to see on the top right hand corner of the screen, the battery level.
On/Off
button