13
Menu Control and Options
The VSM-100 is a menu driven unit. The menu is viewed as part of the output display when it has been
connected to a HDMI / SDI monitor
The menu options are scrolled by turning the Menu Dial to the left or right (See item 1 on page 8). A pointer (
►
)
to the left of the menu options indicates which item is currently selected. To change / select a value gently press
the Menu Dial in towards the VSM-100 case, like a button.
If there are more options in the current menu then an arrow up or down may be displayed to the right of the Menu
Area. To go back to an earlier menu select EXIT from the current options list.
The Main Menu options are:
TOOLS
NEXT MODE
VIDEO DISPLAY
AUDIO VOLUME
AUDIO CHANNEL
CONFIGURATION
NEXT MODE
When first switched on the VSM-100 will display in the Vectorscope mode. Selecting NEXT MODE and pressing
in the Menu Dial will cause the unit to display the next mode in the following order.
VECTORSCOPE
PARADE
WAVEFORM MONITOR
HISTOGRAM
NOTE:
All scope views are displayed at 1280 x 720 regardless of input video format.
VIDEO DISPLAY
When this option is selected the VSM-100 will display only the incoming video. All audio and video scope views
will be hidden when this option is active. This option affects both the SDI loop through and the HDMI output. To
return to a scope view once more press in or rotate the Menu Dial on the VSM-100.