22
Camera Noise
i. Adjust the IRIS of the camera to minimum or cap the lens.
ii. Select PARADE mode on the VSM-100 using the NEXT MODE option.
iii. The noise value will be displayed on the chart. The thicker the value on the line chart, the greater the noise
level. The thinner the trace on the chart, the less the noisy it is
Comparing colour saturation among cameras
i. Aiming the camera at Chroma Du Monde (Set camera to AUTO).
ii. Select VECTORSCOPE mode on the VSM-100 using the NEXT MODE option.
iii. The VECTORSCOPE matrix displaying on VSM-100 represents the colour components from the camera.
iv. Use the SAVE TRACE feature under TOOLS to compare the colour components between cameras.
v. The matrix indicates the current colour components of the camera by showing the positioning of the dots. When
two cameras have aligned luminance, the larger the VECTORSCOPE matrix, the more colour saturation it
represents.
