Datavideo TVS-1000, Instruction Manual

Page: 65 / 75

65
Chapter 11 External Keyboards
The user is allowed to control TVS-1000 with external keyboards such as an RMC-220 Remote
Controller and a standard keyboard. Details of each are outlined as follows.
11.1 RMC-220 Function Keys
There are 10 user-defined function keys, F1 to F10, on RMC-220 Remote Controller. These
function keys are configurable on the TVS-1000 system. Each of these function keys can be
assigned of multiple functions selected from the table below:
Audio DSK General Mix Effect Media Output
Capture Mute
Capture Volume
Input Mute
Input Solo
Input Volume
Output Mute
Output Volume
Streaming Mute
Streaming Volume
Set Position
Set Preview
Set Rotation
Set Scale
Set Source
Transition Cut
Transition Fade
Delay Import Studio
Set AutoPlay
Set Bus A Source
Set Bus B Source
Set Phase
Set Speed
Auto Play
Loop Play
Pause
Play
Select
Stop
Select Preview
Select Program
Transition Cross-Dissolve
Transition Fade to Black
The user just needs to press the RMC-220 function key button once to execute the selected
functions according to the sequence in which the functions are selected.
To assign specific multiple functions to these 10 function keys, open the TVS-1000 configuration
window and click on “ Triggers ” tab. Function key tabs can be found at the top of the
configuration window. Click on the Function Key tab that you would like to customize and in the
example below, Key F1 is selected.
In general, two modes are available and they are “ Simple ” and “ Advanced ”.
11.1.1 Advanced
In Advanced mode, the user is allowed to select all available functions in the above table.
Furthermore, the execution sequence of the selected functions is customizable.