background image

 

 

Warranty 

Standard Warranty 

 

Datavideo equipment is guaranteed against any manufacturing defects for one year from 

the date of purchase. 

 

The original purchase invoice or other documentary evidence should be supplied at the 

time of any request for repair under warranty. 

 

Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not 

covered by this warranty.   

 

All mail or transportation costs including insurance are at the expense of the owner.   

 

All other claims of any nature are not covered. 

 

Cables & batteries are not covered under warranty. 

 

Warranty only valid within the country or region of purchase. 

 

Your statutory rights are not affected. 

Two Year Warranty 

 

All Datavideo products purchased after 01-Oct.-2008 qualify for a free one year extension 

to the standard Warranty, providing the product is registered with Datavideo within 30 days 

of purchase. For information on how to register please visit www.datavideo-tek.com or 

contact your local Datavideo office or authorized Distributors 

 

Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives 

are only covered for the first 10,000 hours, or 1 year (whichever comes first). 

Any second year warranty claims must be made to your local Datavideo office or one of its 

authorized Distributors before the extended warranty expires.

 

Disposal 

 

For EU Customers only - WEEE Marking 

This symbol on the product indicates that it will not be treated as 

household waste. It must be handed over to the applicable take back 

scheme for the recycling of electrical and electronic equipment. For more 

detailed information about the recycling of this product, please contact 

your local Datavideo office. 

 

 

 

 

Summary of Contents for TVS-1000












































































Reviews: