11
MIX Enable/Disable button
A
MIX
, also known as a dissolve, is a transition wherein
the Program video is replaced by the Preview video at
a smooth rate, and at the same time. Pressing the
MIX
button will enable the
MIX
transition effect and
automatically disable the
WIPE
button. To activate the
MIX
effect, simply press the
AUTO
button or move the
T-Bar
.
WIPE Transition Effect Enable/Disable button
Pressing the
WIPE
button enables the
WIPE
transition
effect. After that, the
WIPE
transition effect can be
selected. To trigger the
WIPE
transition effect, simply
press the
AUTO
button or move the
T-Bar
.
Wipe transition effect selection, border and position
can be configured in the OSD menu (
Start
).
PIP / Keyer
Enable/Disable buttons for PIP Keyer
Picture in Picture puts the selected Sub Video Source in
a window on the Main Program view, with control over
window size and placement. For PIP configuration,
please refer to the
PIP
section.
PIP PGM:
Shows the configured PIP on the PGM
output after transition, however, the PIP cannot be
previewed on the QUAD split view display.
PIP PVW:
Sets the configured PIP on the next
transition. Holding down this button allows selection
of the PIP source from the Preview Source row. The
selected source button will flash.
Luma Keyer Enable/Disable buttons
Luma Key PGM:
Shows the luma key source on the
PGM output and enables the luma key effect,
however, the luma key effect cannot be previewed on
the QUAD split view display.
Luma Key PVW:
Enables luma key source for the PGM
output on the next transition. Holding down this
button allows selection of the luma key source from
the Preview Source row. The selected source button
will flash.
Please refer to the
Luma Key
section for luma key
configurations.
Summary of Contents for SE-500HD
Page 1: ...1...
Page 28: ...28 Appendix 4 Dimensions All measurements in millimeters mm...
Page 30: ...30 Service and Support...