36
Flex™ Key and Fill Example CG-350 Set Up
An example set up for the
Flex
™
Keyer
feature would be to supply separate HD-SDI
Key
and
Fill
signals
from a
Datavideo
CG-350 PC
. This PC can provide CG overlays of text and graphics via the outputs of a 3
rd
party PCIe video card such as
Blackmagic Design’s
Decklink HD Extreme 3D+
.
First ensure the CG-350 software is set up for
External key
in settings.
The
Key
signal from the Decklink card is then fed to
input 15
on the SE-3000 (see diagram below). Tap on
Flex
™
Keyer Key
(Foreground) and then select
button 15
from the
Aux Bus row
on the Control Panel.
If the
Fill
signal from this card is fed to
input 16
then you would tap on
Flex
™
Keyer Fill
(Background) and
then select
button 16
from the
Aux Bus row.
Look at a Preview of the Flex
™
output
on a Preview/Auxiliary monitor. Tap on
Flex
™
Keyer Enable
to
turn the keyer
ON.
If everything is cabled correctly (as shown below) then you should be able to see the output from the PC/
CG-350 software on top of the Previewed Flex images.
