Datavideo SE-2000, Instruction Manual

Page: 27 / 40

27
SE-2000 bespoke Tally cabling advice
Datavideo have designed this mixer to work with their own Datavideo wired tally light systems. For more
information on the ITC-100 and TB-5 please approach your local Datavideo dealer or office.
This page shows information for people wishing to create their own bespoke cabling for the purpose of connecting
an ITC-100 or TB-5 unit to the Tally Output connection on the rear of the SE-2000 mixer. If wish to have this
option but do not have the necessary skills to make this cable then please contact your local dealer or Datavideo
office who may be willing to assist in the creation of a cable.
NOTE:
Please be aware that power runs through the cable and a lack of understanding in building either cable
may result in damage to the mixer or the external tally unit. Where damage happens in this way the warranty on
either unit will be invalidated and there may be a chargeable cost for the repair. Please ask for assistance if you
are not sure.
SE-2000 to ITC-100 bespoke Y cable configuration
SE-2000 Tally Output Female ITC-100 Tally Input Male
SE-2000 to TB-5 Tally Box bespoke cable configuration
Some customers will want to use the Tally output of the SE-2000 just for Datavideo’s unique Bi-colour tally
system without using the ITC-100. In this case a TB-5 Tally Box and the following cable will be required instead.
NOTE:
Please be aware that power runs through the cable and a lack of understanding in building the cable may
result in damage to the mixer or the external tally unit. Where damage happens in this way the warranty on either
unit will be invalidated and there may be a chargeable cost for the repair. Please ask for assistance if you are not
sure.
Revised SE-2000 to TB-5 cable pin lay out will be:
RED LED / Actual / Live
Camera 1 Camera 2 Camera 3 Camera 4 Gnd
TB-5 1 6 4 5 14
SE-2000 8 9 10 11 15
AMBER LED / Cue / Next
Camera 1 Camera 2 Camera 3 Camera 4
TB-5 3 8 13 15
SE-2000 1 2 3 4